Our services in Wellington, Wairarapa and Kapiti Coast during Alert Level 2
Information for equipment, housing and vehicle modification assessors
The Wellington region, including Wairapapa and Kapiti Coast, is moving to COVID-19 alert level 2 as of 6pm on 23 June. This follows a person who travelled from Sydney to Wellington and later tested positive. The rest of New Zealand remains at alert level 1. At this stage, the Wellington region will stay at alert level 2 until 11.59pm on Tuesday 29 June.
The Ministry of Health advises that all equipment, housing and vehicle modifications can still go ahead if they can be done so safely (physical distancing of 1 metre, good hand hygiene and cough/sneeze etiquette, good record-keeping to support contact tracing).
We would like to inform EMS assessors how our EMS services will operate in the Wellington region during this time.
When carrying out work for, or on behalf of, Enable New Zealand please follow your organisation’s contact tracing recording requirements.
Band 1, 2 and 3 equipment requests
Band 1, 2 and 3 equipment request processes are operating as usual.
If equipment is being delivered directly to the client
Where possible, the courier will leave the equipment at the door without contact with the client. They will ask the client for their name and update their system to confirm delivery.
If equipment cannot be left on the doorstep
- We will provide our delivery partners with clear instructions on the next steps on a case by case basis.
- This will include a pre-screening health check of the household and PPE where necessary.
- National health and safety measures such as physical distancing and good hand hygiene practices will apply.
If equipment is being delivered to you to pass on to your client
- Please follow your organisation’s practice around contact with clients and infection prevention protocols.
- Any physical interactions between sub-contractors or assessors and clients should be recorded for contact tracing purposes.
EMS Advisory Service
The EMS Advisory Service is operating as normal, while complying with remote working protocols.
Enable New Zealand Housing and Wheelchair and Seating clinics
- Housing and Wheelchair and Seating Outreach Clinics continue to be available.
- The preferred method for all clinics is telehealth.
- A face to face outreach clinic appointment may be considered in exceptional circumstances. The clinic appointment will be carried out safely as per Ministry of Health guidelines.
A guide to Telehealth
The Outreach team have created a guide to using Telehealth as an alternative to face to face assessments.
Submit your referral on the appropriate referral form to email@example.com
If you have any questions or concerns about individual requests
- Please email our EMS Advisory team firstname.lastname@example.org
- Or contact Robyn Williams, Advisory & Outreach Teams Administration Support, directly on 06 3535844 to be put in touch with a member of our Advisory team.
You still need to come through the EMS portal and provide your clinical rationale for your requests as normal.
Our collections service continues to operate as usual and people can use our Collection Request form on our website.
- Where possible, equipment will be picked up from the doorstep, or with minimal interaction with the household.
- Where contactless pickups are not possible, we will work on a case by case basis to determine the safest way to proceed.
- Measures such as physical distancing, appropriate use of PPE, good hygiene practices and keeping a record of all interactions for contact tracing purposes should be followed.
- Due to a potential backlog, there may be some delays in getting a collection completed. We appreciate your understanding and patience during this time.
- Equipment trials will be processed as normal.
- The equipment provided to your client will either be from our reissue stock, or through the normal supplier network.
- Any interactions with a household will require them to follow the set safety procedures of physical distancing, hand hygiene and contact tracing as well as the use of any appropriate PPE.
- Where equipment needs to be delivered and set up by a supplier or sub-contractor: We will ask the supplier/subcontractor to follow our pre-screen checklist procedure to determine any COVID-19 risk.
- Where a piece of equipment requires support and set up by an assessor or sub-contractor: The equipment supplier will contact you ahead of delivery to confirm a plan around installation and safe and proper use of the equipment.
- Unsuccessful trial equipment can be collected from your client’s home if it is safe to do so.
- Physical distancing, minimal contact, contract tracing recording and good hygiene practices will be followed by any suppliers, sub-contractors or freight agents who pick up the equipment on our behalf.
- Where it is not possible to collect the equipment safely, it can remain in your client’s home until such time we can arrange collection.
- Send your Trial Unsuccessful Documentation to email@example.com as normal.
- Please follow the usual process by contacting firstname.lastname@example.org to let us know the outcome.
- Please send the final quote from the supplier with the trial approval document to email@example.com so we can complete the trial for you.
Equipment Repairs (Equipment subcontractors)
- Our sub-contractors have been provided with a pre-screen health checklist to determine the health status of the household ahead of any scheduled repair.
- If they can carry out the repair safely it will go ahead.
- If the repair cannot be carried out safely: We will need to assess these instances on a case by case basis.
- We may be able to support a carer or support person to carry out a repair, or we can focus on replacement rather than repair.
- Standard annual checks of equipment can take place.
All housing modification requests can be submitted following the usual process.
Where internal access is required
Our sub-contractors will follow these processes:
- A pre-screen health checklist will be carried out to determine the health status of the household.
- Where there is no risk of COVID-19, the modification can continue with safety procedures in place: minimal physical interactions, physical distancing; good hygiene practices and the recording of interactions for contact tracing purposes
- A copy of the contractor’s Site Safety Plan should be submitted to ENZ prior to work commencing. This should include any COVID-19 Safety Management Plan measures the have been implemented
- Where there are risks around COVID-19 exposure: These will be managed on a case by case basis in conjunction with the assessor and building consultants.
- Pre-construction site meetings can take place with the appropriate safety protocols in place around physical distancing and contact tracing.
- Where we receive a vehicle modification request we will process it through our system as per the normal process.
- Requests will be managed on a case by case basis in collaboration with the assessor and sub-contractors.
- Any modification requests that cannot be carried out safely as per government guidelines will remain in our system until such time as they can commence safely.
If you choose to reissue equipment, the equipment cleaning must meet your DHB infection control process for equipment.
Keeping you informed
We are following issued by the Ministry of Health and the Government to ensure that all our activities can be carried out safely. The health and wellbeing of our clients, stakeholders and staff remains our highest priority.
Please ensure you read any updates sent to you by Enable New Zealand so you can be confident you are up to date with the latest developments and process requirements.